Ok then a fiddling update of my gridseed mining experience, BFGminer seemed to piece of job good for almost pools but at that spot was quite a few pools that did non similar it.
So I went ahead together with tried CGminer which inwards my watch the Gridseeds ran alot amend on.
Originally I tried CGminer 3.7.2 but I ran into alot of issues amongst the Gridseeds non existence detected, I tried using ZADig to modify the Gridseed drivers which I dont intend made whatever difference
So I ended upwards using CGminer 4.3.5 amongst built inwards zeus back upwards together with it worked great, at get-go no Gridseeds were detected but amongst CGminer running I plugged them i 1 past times 1 together with they were picked upwards together with started hashing.
I accept made a
zip file which is hither for CGminer 4.3.5 amongst a written config file, all you lot accept to create is edit the config file together with aim the miner at the pools you lot desire to together with it should move fine for you lot Gridseeds.
This is all setup every bit scrypt mining exclusively together with every bit ever guys everything you lot create is at your ain risk, create permit me know how you lot become on
IF YOU NEED TO USE ZADIG (please move careful using this I accept had lots of issues previously)
– Download together with run the latest version of Zadig– From the Zadig interface select Options together with conduct List All Devices– From the Dropdown listing of devices select CP2102 USB to UART Bridge Controller together with click on Replace Driver amongst the WinUSB driver selected– If you lot accept multiple 5-chip GC3355 DualMiner USB devices connected you lot may need to repeat the physical care for for all of them
It seems that at that spot are simply about ASIC devices that may move using dissimilar virtual USB to COM drivers other than the CP2102 that our unit of measurement has (for representative ST32 Virtual COM Port), unfortunately nosotros don’t accept whatever of those to examination with. You tin yet endeavor to brand things piece of job past times replacing the other driver amongst WinUSB, simply select the correct refer from the dropdown box (do non endeavor to rename drivers, it is pointless) together with Replace it amongst WinUSB (you may need to unplug together with plug the USB cable to the miner afterward that). If afterward installing the WinUSB driver over the virtual USB to COM driver the ASIC does non piece of job amongst cgminer, you lot simply need to uninstall the driver from the Device Manager together with unplug/plug the USB cable to the device for it to install the master USB to COM driver together with it should move surgical physical care for 1 time to a greater extent than amongst cpuminer (note that this agency you lot may accept it running on a novel COM port).
